Additional Information:
Additional Information:
Additional Information:
Additional Information:
Additional Information:
Additional Information:
Additional Information:
Additional Information:
Additional Information:
Product Details:
Material | Steel. Stainless Steel |
Place Of Origin | Navi Mumbai |
Shipping Terms | Ex works at Navi Mumbai office |
Payment And Terms | Against Proforma Invoice |
Note:
Swing bolts similar to DIN 444 however, steel design with higher quality 8.8. The stainless steel A2-50 design has a tensile strength of min. 500 N/mm2.
Additional Information:
Note:
Used in jigs and fixtures as positioning control for pre-machined work pieces. Sensitivity
accuracy 0,015 - 0,075 mm depending on the work piece surface. Contact control by the
Additional Information:
Note:
Expander® sealing plugs are used for safe, quick and economic sealing of bore holes in fluid technology, e.g. hydraulic drilling holes in jig and fixture construction. Assembly is effected by pressing in the sealing plug into the drilling hole by means of the prescribed setting die.
Please refer to the technical data following these product information pages.
Note:
Expander® sealing plugs are used for safe, quick and economic sealing of bore holes in fluid technology, e.g. hydraulic drilling holes in jig and fixture construction. When using sealing plugs with pull-anchor, assembly is made by means of user friendly assembly devices.
Body and pin are pre-assembled and suitable for automated processing.
Please refer to the technical data following these product information pages.
Note:
Used in jigs and fixtures as positioning control for pre-machined work pieces. Sensitivity
accuracy 0,015 - 0,075 mm depending on the work piece surface. Contact control by the
compressed-air backwash, indicated on the monitoring unit (ref. no. 22800.0612).
Additional Information:
Note:
For tanks without excess pressure. Can be fitted without threads in borehole Ø H11.
Sealing by simply tightening the ring nut.
Temperature range from - 20 °C up to + 70 °C.
Additional Information:
Note:
Expander® sealing plugs are used for safe, quick and economic sealing of bore holes in fluid technology, e.g. hydraulic drilling holes in jig and fixture construction. Assembly is effected by pressing in the sealing plug into the drilling hole by means of the prescribed setting die.
Please refer to the technical data following these product information pages.
Note:
Expander® sealing plugs are used for safe, quick and economic sealing of bore holes in fluid technology, e.g. hydraulic drilling holes in jig and fixture construction. When using sealing plugs with elongated pull-anchor, assembly is made by means of user friendly assembly devices.
Body and pin are pre-assembled and suitable for automated processing.
ATTENTION:
If Expander® sealing plugs with pull-anchor are applied to separate grooves, the admissible working pressure at the setting side has to be reduced by 50 %!
Please refer to the technical data following these product information pages.
Note:
To be used as seats and stops.
Additional Information:
Additional Information:
Note:
The "high precision design" swing bolts exceed the DIN Version's quality. The thread is rolled - the shaft diameter is equal to the roll diameter. The surfaces -s- are machined.
Bore tolerance d2 = H7.
Additional Information:
Note:
Assembly tool for the safe and easy assembly of Expander® sealing plugs with pull-anchor / elongated pull-anchor.
Technical details of the pneumatic assembly tools:
• working pressure: min. 5 bar / max. 7 bar
• air volume required at 5.6 bar = 3.5 l.
• working noise <75 db(A)
• cycles 2 s.
Attention:
The supply volume of the original equipment of both, mechanical and pneumatical, assembly tools includes for the ram, the clamping jaws and the clamping jaws' housing. Mechanical assembly tool: nozzles are also included in the supply volume.
Pneumatic assembly tool: nozzles have to be purchased separately.